Essential Steps for Installing a New Shower Unit

Request An Appointment

Just how do you feel when it comes to How to Build a Shower Enclosure for Your DIY Bathroom?

An effective shower installation calls for cautious preparation as well as a great deal of job. Most of the times, you will require to do 3 kinds of jobs: framing walls, mounting the plumbing, and completing wall surfaces.

Various Types of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower device can be attached to the bath faucet according to your requirement, and also the water temperature level can be changed via the faucets. Push-on mixers are cheap and very straightforward to install. However, although the hose connection is simple, it is easily removed. Furthermore, it is bothersome to change the temperature level.

Bath/Shower Mixer: The pipe as well as spray of this type of shower are combined with a bathroom mixer faucet, as well as the temperature can be changed with the bath faucets. It is a really affordable choice and no extra plumbing is included. Nevertheless, the bath/shower mixers additionally struggle with inconvenient temperature control alternatives.

Handbook Mixer: The tube and also spray of a manual mixer shower system belong of the wall surface unit and the hot and cold water supplies are linked to a solitary valve The temperature and also pressure of the water are controlled via either one or a selection of knobs (in much more costly showers). Although temperature level control is a lot easier in hand-operated mixer types, they are more expensive than the previously pointed out mixers. They likewise need extra plumbing of cold and hot water system pipelines.

Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall surface unit and the cold and hot water products are linked to a single valve below as well. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to stop it from ending up being too hot. Among the largest advantages of a thermostatic mixer shower kind consists of practical temperature level control. Nonetheless, it is the most pricey of the various mixer choices.

Power Shower: A power shower is a single device consisting of a powerful electrical pump that can changing both the water stress and temperature level. This type of shower can be fitted if there is water supply from a cold water tank and a warm water cylinder. A power shower makes the change of both pressure and also temperature simple. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

Electric Shower: An electrical shower is plumbed into a keys cold water supply as well as it heats up the water electrically. It is important to note that for this shower kind to be installed, the keys stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature and also stress to be adjusted through a knob. Designs with temperature level stabilisers are much better as they continue to be untouched by various other faucets somewhere else being used within the family. A significant disadvantage of electrical showers is that the control handle only enables the choice of high temperatures at less pressure, or reduced temperatures at a higher pressure. This is problematic in the winter when the spray is often weak and also the keys water is chillier. However, this problem is taken on in some designs which are offered with a winter/summer setup.

Many Common Blunders

Breaking or ignoring neighborhood code limitations.

Using pipelines that are too tiny.

Connecting copper to galvanized without making use of a brass or dielectric fitting between both.

Not using tape or pipeline compound at threaded joints.

Uneven your components when installing them.

Not mounting an air gap filling up for components.

Cutting supply stub outs also brief to install the shutoff valves onto after the ended up wall surface is in location.

Not effectively aligning tubing right into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leak.).

When turning the water back on in your home, always run the outdoors hose pipe valve or flush your commodes to hemorrhage dust as well as air from the lines. This debris can create problems in your sink taps and various other plumbing trim.

Prep work.

Firstly, you have to decide on the kind of shower that you desire to install. It is very important to ascertain whether the selected shower can managing certain systems and can control a risk-free degree of water via the central heating boiler. Most shower units nowadays are developed to be versatile to different water pressures (such as kept hot water and cool keys).
It is additionally vital to take into account the water stress and also the preparation of the piping as well as drainage for the shower.

Method.

Relying on the type of shower you wish to mount, the shower head need to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Prior to beginning, it is advisable to mark the positions of the shower head as well as control, and also to plan the pipe-work included. Furthermore, the water drainage system to remove the waste water will need to be prepared. Both placements of the cable television path as well as the shower button will certainly additionally require to be considered if an instantaneous or electric shower unit is being installed.
Use the instruction guide offered with the shower device to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is very important to remove the supply of water. In order to secure the pipes, they need to be offered a waterproof covering and likewise fitted with separating valves. The pipelines can then be buried right into the wall surface and smudged over to neaten the overall appearance.
Fit the base tray, shower head, and also fittings.
Link the main shower control to the pipelines that will be providing the water (This may call for a female screw string adapter).
Reconnect the water system and also test the pipelines for any leakages, as some might need firm.
If you are installing an electric shower, remember to switch off the electricity supply prior to making any kind of electric links. Once these connections have actually been made (there need to be assistance within the user's manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower.

The cold water tank can be raised to a better height (in some cases as low as 150mm (6inches)) by installation a solid wood assistance under it - perhaps made up of struts and also blockboards. If you pick this alternative, the main as well as distribution pipes will also need to be elevated to fulfill the brand-new height of the tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached right into the power supply in order to operate.

Piping and Water drainage.

It is best to utilize 15mm diameter supply pipelines, as well as make the runs to the shower as brief as well as straight as possible so regarding keep maximum stress and also reduce heat loss. Furthermore, by reducing using elbows for pipeline edges, you can reduce the resistance in the circulation of the water system. You can accomplish this by flexing the pipelines rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We are very inquisitive about How to Install a Direct-to-Stud Shower Enclosure and I am assuming you appreciated the blog entry. I beg you take the time to share this article if you enjoyed reading it. We thank you for reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.

Book A Service